DPLOW=0, OTGEN=0, DMLOW=0, DPHIGH=0
OTG Control register
OTGEN | On-The-Go pullup/pulldown resistor enable 0 (0): If USB_EN is 1 and HOST_MODE is 0 in the Control Register (CTL), then the D+ Data Line pull-up resistors are enabled. If HOST_MODE is 1 the D+ and D- Data Line pull-down resistors are engaged. 1 (1): The pull-up and pull-down controls in this register are used. |
DMLOW | D- Data Line pull-down resistor enable 0 (0): D- pulldown resistor is not enabled. 1 (1): D- pulldown resistor is enabled. |
DPLOW | D+ Data Line pull-down resistor enable 0 (0): D+ pulldown resistor is not enabled. 1 (1): D+ pulldown resistor is enabled. |
DPHIGH | D+ Data Line pullup resistor enable 0 (0): D+ pullup resistor is not enabled 1 (1): D+ pullup resistor is enabled |